A drafty window can make a room feel cold even when the heating is on. Cold air often comes through small gaps around the frame, not through the glass itself. Sealing those gaps is a simple job that can make a room more comfortable. You do not need to replace the window to fix a small draft. Start by finding where air comes in, then seal it in the right way.
Find where the draft comes from
On a windy day, hold your hand near the window frame, slowly, and feel for cold air. Check the top, sides, and bottom of the frame, and the meeting point where two sashes meet. You can also hold a thin tissue near the frame and watch if it moves. Mark drafty spots with small pieces of tape, so you can find them again when you start sealing.
Clean the frame before sealing
Wipe the frame and the area around gaps with a damp cloth and let it dry. Dust and old paint can stop sealant from sticking well. Remove loose or cracked old sealant carefully with a flat tool, but do not damage the frame. A clean, dry surface helps new sealant last longer and look neater.
Use draft strips on moving parts
Draft strips, also called weather strips, work well on parts that open and close, like sashes and doors. They come in different types, so check the product guide for the type that fits your window. Measure the length you need, cut it cleanly, and press it into place as the guide shows. Test the window after fitting, because a strip that is too thick can stop the window from closing properly.
Seal fixed gaps with caulk
For gaps that do not move, such as between the frame and the wall, caulk can help. Choose a caulk made for windows, and check the label for indoor or outdoor use. Apply a thin, even line, and smooth it with a wet finger or a small tool, as the guide suggests. Do not seal weep holes or drainage slots, because those let water out. If you are unsure which gaps to seal, leave that gap and ask a skilled person.
Check the window closes well
After sealing, close and lock the window and test for drafts again. The window should close fully without force. If it sticks, the draft strip may be too thick or placed wrong. Adjust it before you finish. A window that does not close well can be a safety issue, so do not force a lock that does not fit.
Maintain seals over time
Check window seals once or twice a year, especially before cold weather. Look for cracked caulk, flat draft strips, or gaps that have reopened. Replace worn strips and touch up caulk as needed. Small, regular checks keep drafts from returning and help windows last longer. Keep spare strips and caulk in a dry place for quick fixes.
Checklist
- Find drafts by hand or with a thin tissue
- Clean and dry the frame before sealing
- Use draft strips on moving parts
- Use caulk only on fixed gaps, not drainage holes
- Test that the window closes and locks well
- Check seals once or twice a year
Frequently asked questions
Can I seal a window that needs to open for safety?
Yes, but only with draft strips that still allow the window to open. Do not seal a fire escape window shut with caulk. Safety comes before draft proofing.
Why does my window still feel cold after sealing?
Glass itself can feel cold, even with no draft. Curtains or blinds at night can help, and a draft free frame is still a good step. If condensation is heavy, check room ventilation as well.
Should I seal the outside or the inside?
Both can matter, but start inside for comfort and easy checking. Outdoor sealing may be needed for gaps in the outer frame, and should be done in dry weather, following the product label.
Sealing window gaps is a small job with a clear payoff. Find the draft, clean the frame, use the right strip or caulk for each gap, and test the window. With regular checks, a room stays warmer, quieter, and more comfortable.