A dripping tap wastes water and makes a steady, annoying sound. Many drips come from a worn washer or a loose part, and a careful homeowner can often fix a simple drip. You do not need to be a plumber to try basic steps, but you do need to turn the water off first and work slowly. If the tap is damaged, leaking inside the wall, or you feel unsure, stop and call a skilled plumber.
Turn the water off first
Find the shut off valve for the tap, usually under the sink or near the water meter. Turn it off and open the tap to let out remaining water. Keep a towel and a small bucket nearby to catch drips. Never open a tap for repair while water is still on, because water can spray and damage the area. This first step keeps the job safe and dry.
Find the type of tap you have
Taps look similar but work in different ways. Some have a washer that wears out, while others use a cartridge. Take a photo of the tap and its parts before you take anything apart. Note the brand and model if it is marked on the tap, and check the product guide if you have it. A photo helps you put parts back in the right order.
Remove the handle carefully
Turn off the water, then remove the tap handle as the guide shows. Handles often have a small screw under a cap or cover. Keep screws and small parts in a small bowl so they do not roll away. Work slowly and do not force parts. If a part will not move, stop and check the guide again, rather than breaking it.
Check the washer or cartridge
Look at the washer for cracks, flat spots, or wear. A worn washer often looks thin or damaged at the edge. If the tap uses a cartridge, check it for cracks or mineral buildup. Clean away loose buildup with a cloth, but do not use sharp tools that can scratch parts. If a part looks clearly worn, take it to a store to find an exact match. Do not guess the size, because a wrong part may leak again.
Replace the part and reassemble
Put the new part in exactly as the old one sat. Tighten parts firmly but gently, and do not over tighten, because this can crack parts or damage threads. Put the handle back, and replace any caps or covers. Turn the water back on slowly and watch for leaks around the tap. A slow turn on lets you spot a problem before water spreads.
Test the tap over time
Run the tap, turn it off, and watch it for a few minutes. Check under the sink as well, because a leak can hide there. Test it again later in the day, and again the next morning. A drip that stops for an hour but returns later may mean another part is worn. If the drip continues after a careful washer change, call a plumber rather than trying stronger fixes.
Checklist
- Turn the water off and drain the tap
- Take a photo of the tap before taking it apart
- Keep screws and small parts in a bowl
- Check the washer or cartridge for wear
- Replace with an exact matching part
- Turn water on slowly and test over time
Frequently asked questions
Why does my tap drip even when it is off?
A worn washer or cartridge often lets a small amount of water through even when the tap is closed. Replacing the worn part usually stops this kind of drip.
Can I fix a drip without turning the water off?
No. Always turn the water off first. Working on a tap with water on can cause a spray, a flood, and damage to parts and cabinets.
When should I stop and call a plumber?
Stop if water leaks inside the wall, if a pipe is damaged, if parts are stuck or broken, or if the drip returns after a careful repair. A plumber can find deeper problems safely.
A dripping tap is often a small repair, not a crisis. Turn the water off, check the worn part, replace it with an exact match, and test slowly. When you work carefully and know when to stop, you save water and keep the job safe.